Additions:
Primary CALibrate Voltage (approx batt voltage)
Secondary CALibrate Voltage (approx half or double batt voltage)
Nominal ADC scale factor (based on component values)
Autoshutoff Maximum ON Time
Autoshutoff ramp rate
ON Voltage Fixed Values 1..5
Locked autoshutoff max on Time
Deletions:
Primary CAL Voltage
Secondary CAL Voltage
Maximum ON Time
ON Voltage Values 1..5
Locked max on Time
Hotwire Regulator Project
DRAFT
Control Parameters in Nonvolatile Ram Memory
ADC Scale Factor (set by Primary calibration)
ADC Scale Offset (set by Secondary calibration)
Primary CAL Voltage
Secondary CAL Voltage
Feedback Loop Gain
Feedback Loop Update Rate
PWM Slew Rate Limit
PWM to ON (> transitions to ON)
PWM Max (PWM not allowed to exceed value)
PWM Frequency
Minimum Battery Voltage
Battery Retry Max
Maximum ON Time
ON Voltage Values 1..5
ON Voltage Ramp Low, High, Rate
Ramp direction up, down, both
Initial Voltage fixed first, fixed last, fixed memory, ramp low, ramp high, ramp memory
Initial Voltage Memory, direction
Lock/Unlock Hold Time
Locked Voltage
Locked max on Time